Five-hole BRACKET in galvanised steel with nylon fastening dowels. It is a fundamental fastening accessory in the RINFOR SYSTEM 1 and 2 to prevent slab detachment.
Largeur: 35 mm
Longueur: 120 mm
Utiliser en portant des gants de protection
Matériau résistant aux alcalins
- Matériau en vrac 1 unité
The BRACKET in galvanised steel is used to fasten the ARMAGLASS STRUCTURA mesh where they overlap on the wall in the systems for preventing slab detachment. The dimensions of the bracket are calibrated on the openings of the ARMAGLASS STRUCTURA mesh, thus ensuring effective locking. The DOWEL is made of age-resistant nylon and can be used in a wide range of temperatures (from -40° C to +80° C). The expansion of the DOWEL when inserting the galvanised screw and the effective anti-rotation wing, which lock the dowel within the hole during installation, ensure a robust and tenacious seal, both on solid or concrete bricks and hollow bricks. The DOWEL accessory has a collar around the top that prevents the DOWEL from penetrating the hole. The galvanised screw offers excellent resistance to corrosion.
Diameter 8 mm — Length 40 mm
Diameter 5 mm — Length 70 mm
At least one BRACKET every 50 centimetres or so, with five fastening DOWELS (see RINFOR SYSTEM 1 and 2 in our technical literature).
In preventing slab detachment, the BRACKET is a robust and economical fastening element in the ARMAGLASS STRUCTURA network in the RINFOR SYSTEM 1 and 2.
Attach the ARMAGLASS STRUCTURA mesh in the area of overlap in the wall with the specific galvanised steel bracket with five holes, fastening by means of a nylon dowel and galvanised steel screw. The substrate must be dry to allow for an effective hold of the DOWEL. For clarification on the positioning of the BRACKET, see the drawings in our RINFOR SYSTEM 1 and 2 technical literature.
- Ajouter à d'autres composants
- Applicaction manuelle
- Mortiers de béton, à la chaux et mixtes
- Maçonneries en briques creuses