ARMAGLASS STRUCTURA 250

280 grams/m2 of alkali-resistant fibreglass structural mesh

Code: RNF.0376

Composants: 1

Aspect: Filet

280 gram/square metre structural mesh made of alkali-resistant fibreglass, containing >16% zirconium dioxide, constructed in English-style lap primed with thermosetting polymer. Certified mesh to prevent slab detachment. Easy and quick application, simple to handle and to cut. Combines lightness and thinness with excellent mechanical characteristics in terms of the weft and warp. Resistant to atmospheric agents and aggressive environments, it confers durability to the composite systems in which it is used. Suitable for any substrate and perfectly compatible with both cement-based and lime-based mortars.

Linee di appartenenza

Caractéristiques générales

adapté-au-contact-avec-l-eau-potable

Adapté au contact avec l'eau potable

conservabilité-illimitée

Conservabilité illimitée

largeur

Largeur: 100 / 200 cm

longueur

Longueur: 50 m

non-inflammable

Non inflammable

résistant-aux-rayons-uv

Résistant aux rayons UV

utiliser-en-portant-des-gants-de-protection

Utiliser en portant des gants de protection

Spécificités techniques

Allongement longitudinal à la rupture

1.70 %

Densité du verre

2.68 g/cm³

Dimension de la maille

25 x 25 mm

Epaisseur

1.10 mm

Épaisseur de texture équivalente

0.0339 mm

Épaisseur équivalente à la chaîne

0.0339 mm

Module d'élasticité net (chaîne)

58.441 N/mm²

Module élastique en verre

72.000 N/mm²

Module élastique net (trame)

61.097 N/mm²

Poids du tissu brut

182 g/m²

Poids du tissu habillé

280 g/m²

Résistance à la traction de la chaîne (vitesse de traction 10 mm / min)

55 kN/m

Résistance à la traction de la chaîne (vitesse de traction 100 mm / min)

65 kN/m

Résistance à la traction de la trame (vitesse de traction 10 mm / min)

58 kN/m

Résistance à la traction de la trame (vitesse de traction 100 mm / min)

64 kN/m

Résistance à la traction de la trame à fil unique (vitesse de traction 10 mm / min)

1.41 kN

Résistance à la traction de la trame à fil unique (vitesse de traction 100 mm / min)

1.57 kN

Résistance à la traction du fil de chaîne simple (vitesse de traction 10 mm / min)

1.34 kN

Résistance à la traction du fil de chaîne simple (vitesse de traction 100 mm / min)

1.60 kN

Section chaîne-trame résistante

33.95 mm²/m

Surface nominale d'un seul fil

0.789 mm²

Couleurs disponibles

- Rouge

Emballages et dimensions

- Rouleau 50 m²

- Rouleau 100 m²

Caratéristiques

Ideal for any type of substrate. Particularly suited to preventing slab detachment in combination with special steel components, also together with mortars with a UNISAN hydraulic binder base, which increases the performance of the system by ensuring breathability and a dehumidifying effect.

Consommations

1.1 m/m²: The sheets adjacent to the fibreglass mesh are to be overlapped along the edges by at least 10 centimetres.

Champs d'utilisation

ARMAGLASS STRUCTURA 250 is a mesh for the structural reinforcement and consolidation of masonry and vaulted structures. It is ideal for reinforcing plasters with anti-overturning function, for the reinforcement and distribution of shrinkage stresses on walkable or drainage screeds and concrete flooring. A certified mesh to prevent slab detachment in combination with special steel components (screws, dowels, flanges).

Modalités d'utilisation

Application on masonry and vaults:
In the event that connectors are being used, proceed with creating holes of a suitable diameter, in accordance with the chosen connection system and arranged in line with the design instructions and with the selected connection system (ARMAGLASS CONNECTOR, ARMAGLASS CONNECTOR SINGLE, ARMAGLASS CONNECTOR TWIN). Secure the connectors with resin anchors (SYNTECH PROFIX) or hydraulic binder-based slurry (GROUT CABLE, SANAFLUENS). Apply an initial layer of mortar (see the technical data sheet of the selected product), positioning the ARMAGLASS STRUCTURA 250 mesh on the still-fresh mortar, taking care to ensure an overlap of at least 10 centimetres, before applying the second layer of mortar. Whilst the mortar is still fresh, lay the mesh sheeting, proceeding from top to bottom, and immersing with the help of a putty knife, being sure to overlap each segment by at least 10 centimetres and impeding the formation of bubbles and bends.
Application on screeds:
Apply an initial layer of screed (see the technical data sheet of the selected product), laying the ARMAGLASS STRUCTURA 250 mesh on the first layer of still-fresh screed, taking care to ensure an overlap of at least 10 centimetres, then applying the second layer of screed.

Méthodes d'application

- Applicaction manuelle

Supports autorisés

- Crépis

- Béton

- Mortiers de béton, à la chaux et mixtes

- Maçonneries mixtes

- Maçonneries en briques creuses

- Maçonneries en pierre

- Chapes de support

- Pierres naturelles et porphyres

- Briques

Contactez-nous dès maintenant

Vuoi saperne di più sui nostri prodotti?

Attention, veuillez remplir correctement ce champ.
Attention, insérer une adresse email valide.
Attention, veuillez remplir correctement ce champ.

En soumettant, j'accepte les déclaration de confidentialité

Attention, veuillez remplir correctement ce champ.

Inscription à la newsletter

Partager

Produits en vitrine

  • Concrete Repar
  • Pro Seal
  • Sanageb